using Edge.Core.Parser.BinaryParser.Attributes;
using Edge.Core.Parser.BinaryParser.MessageEntity;
using System;
using System.Collections.Generic;
using System.Text;

namespace VeederRoot_ATG_Console.MessageEntity.DispenserInterface.Outgoing
{
    /// <summary>
    /// Report a fuel start event to Veeder Root ATG console.
    /// 'fuel start' indicates a pump get authorized and is about to fueling.
    ///  <SOH>B000000012FE0A<EOT>
    ///     Event ID  = 0
    ///     Transmission delay = 0 seconds
    ///     Selected Fueling Position = 12
    ///     
    /// 
    ///  <SOH>B100000501FE06<EOT>
    ///     Event ID  = 1
    ///     Transmission delay = 5 seconds
    ///     Selected Fueling Position = 1
    /// </summary>
    public class StartEventReportRequest : OutgoingMessageBase
    {
        /// <summary>
        /// 
        /// </summary>
        /// <param name="eventId">must range from 0 - 9, rotation control is needed, Start Events and Stop Events contain event IDs to help the dispenser interface module identify transmissions that are repeated as a result of communication errors.  Once an event report (start or end) is successfully transmitted, the Event Message ID must change so the next event report (start or end) will get a new ID in the range 0 - 9.  An event report must keep the same ID until it is successfully transmitted. The status report does not require an ID</param>
        /// <param name="errorFlag">Range: '00' to 'FF'</param>
        /// <param name="secondsDelay">0-9999</param>
        /// <param name="fuelingPositionId">0-99</param>
        public StartEventReportRequest(int eventId, byte errorFlag, int secondsDelay, byte fuelingPositionId)
        {
            base.FunctionCodeRaw = "B";
            base.EventId = eventId;
            base.ErrorFlag = errorFlag;
            base.SecondsDelay = secondsDelay;
            base.FuelingPositionId = fuelingPositionId;
        }
    }
}